Max Water Premium Alkaline Reverse Osmosis Water System 10 Stages

Max Water Premium Alkaline Reverse Osmosis Water System 10 Stages

10-Stage Alkaline Reverse Osmosis System with 5-in-1 pH+ Remineralization Filter

Upgrade your drinking water with the Max Water 10-Stage Under-Sink Reverse Osmosis System. Designed for homes, kitchens, offices, coffee stations, and refrigerator connections, this advanced RO system delivers clean, fresh-tasting water while adding beneficial minerals back after the reverse osmosis stage.

The system combines sediment filtration, activated carbon filtration, a high-efficiency RO membrane, a 5-in-1 alkaline remineralization filter, and a final coconut-shell carbon polishing stage. Together, these stages help reduce chlorine, sediment, unpleasant tastes, odours, dissolved minerals, and other common water impurities.

After the RO membrane removes dissolved solids, the 5-in-1 pH+ alkaline filter helps raise the water's pH and adds minerals such as calcium and magnesium. The final inline post-carbon filter then improves taste before the water reaches your faucet.

This is an excellent choice for customers searching for an alkaline reverse osmosis system, under-sink water filter, remineralization RO system, or high-purity drinking-water system.

10 Stages of Filtration

1. Stage 1: 5-micron polypropylene sediment filter Part No. 104002
2. Stage 2: Granular activated carbon (GAC) filter Part No. 104004
3. Stage 3: 5-micron carbon block (CTO) filter Part No. 104005
4. Stage 4: Thin-film composite RO membrane Part No. 104092
5. Stages 5–9: 5-in-1 pH+ alkaline, far-infrared, and remineralization filter Part No. 104185
6. Stage 10: Inline T33 coconut-shell GAC post-filter Part No. 104041

Key Water-Quality Benefits

• Helps reduce chlorine, sediment, unpleasant tastes, and odours
• Helps reduce TDS = Total Dissolved Solids. after the RO membrane stage
• Helps reduce certain dissolved metals and minerals
• Adds calcium and magnesium back into the treated water
• Helps raise the pH of low-mineral RO water
• Final coconut-shell carbon stage improves taste and freshness
• Suitable for drinking water, cooking, coffee, tea, and ice makers

Included Components

• 10-stage RO unit with clear pre-filter housings
• Selected RO membrane (price varies by selection)
• Selected drinking-water faucet (price varies by selection)
• One set of pre-installed filters
• 3.2-gallon RO storage tank
• Dry vertical pressure gauge
• Filter-housing wrench
• Standard installation accessory pack
• Optional booster pump, when selected (additional cost)

System Specifications

• Approximate TDS reduction: 95% to 97% after the RO membrane stage
• Approximate product-to-waste-water ratio: 1:2
• Physical dimensions:
  • RO unit: 15 in. L × 6 in. D × 17 in. H
  • Storage tank: 11 in. diameter × 14 in. high
• Approximate total weight: 27 lb.
• Operating-water temperature: 40–104°F, maximum 40°C
• Recommended operating pressure: 45–80 PSI

Performance Notice: Membrane output, contaminant reduction, TDS reduction, pH adjustment, mineral addition, and waste-water ratios are approximate and may vary depending on feed-water pressure, temperature, pH, TDS, contaminant concentration, membrane model, filter condition, and installation conditions.